Gelöst

VDSL Ausbau / Vectoring in 13591 & Frage zu Super Vectoring

vor 8 Jahren

Hallo zusammen,

 

ich hab direkt 2 anliegen. Das erste geht erstmal um den Vecotring Ausbau und das 2. um Vectoring/Super-Vectoring.

 

Also zu 1.:

 

Ich habe gestern aus Interesse mal einen Blick auf die Ausbaukarte geworfen (das letzte mal ist ca 3 Monate her).

Ich konnte überraschend feststellen, dass auf einmal ein haufen kleiner VDSL100 Punkte aufgetaucht sind welche vor kurzem noch nicht da waren.

Nachdem ich ein wenig gesucht hab, weiß ich jetzt, dass die Vectoring Umstellung nicht auf der Ausbaukarte gezeigt wird. Auch wird zum Teil nicht gezeigt, an welchen kleinen weißen Punkten grad ausgebaut wird. Demnach tauchen die Punkte einfach auf und sind Verfügbar.

 

Ich selbst hab eine 25k, da 50k nicht ankommen. Jetzt das lustige: In der Straße über mir sowie links unter mir (Auf der Karte: Zweiwinkelweg / Brunsbüttlerdamm) liegen nun 100k (vermutlich durch Vectoring? Oder wurde komplett neu gebaut? Es gibt ja immer noch kleine weiße flecken dort). Bei mir bleibt es aber noch bei 25k.

 

Die Info zur Netzumschaltung sagt, dass es für meine Kundennummer keinen Termin für eine Umschaltung gibt. Ich hab dann ein wenig weiter gesucht und sämtliche Threads hier im Forum zu Berliner Vectoring durch gelesen. Ich häng immer noch an einer Infineon (11.8.6) somit sieht's wohl schlecht aus. Ich hab gelesen, dass eine Broadcom "pflicht" für Vectoring ist. Vermutlich hängt hier immer noch jemand an ISDN?

 

Nun die Frage an die Telekom (da die normalen "publik" Info's nicht wirklich weiter helfen, Kundennummer ist im Profil hinterlegt): Wie sieht es hier grad aus? Was wurde da ausgebaut? Kann man mit einem Umbau zu Vectoring bald rechnen? (Bis zur Freischaltung dauert es ja dann eh noch)

 

 

 

Zum 2.:

 

Da ich aktuell eine 25k habe, wird Vectoring mir dann eine 50k geben oder sind selbst 100k drin? Ich Frage aus interesse, da laut meinem Router (und ja ich weiß, dass die Werte nicht wirklich relevant sind) eine Leitungskapazität von 53k/12k (Leitungsdämpfung: 21dB down/30dB up) anliegen (wenn Bitswapping an ist) nur der DSLAM auf max 25k "ausgelegt" ist.

 

Wenn irgendwann dann mal Super Vectoring kommt: Würden aus 50k dann 100k werden? Und aus 100k dann 250k? Oder sind dies nur "die besten Werte im Optimalfall."

 

 

Grüße

1784

0

21

  • Akzeptierte Lösung

    akzeptiert von

    vor 8 Jahren

    Hallo @SiAl,

    ich habe schlechte Nachrichten.
    Ihr Kabelverzweiger ist nicht ausgebaut und es gibt kein Querkabel zu einem ausgebauten Verzweiger.
    Mehr als VDSL 25 geht nicht aufgrund der hohen Dämpfung.


    Grüße Detlev K.

    0

    0

Das könnte Ihnen auch weiterhelfen

Beliebte Tags letzte 7 Tage

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.