Hinweis:

Dieser Inhalt wurde für MagentaTV 2.0 erstellt und ist möglicherweise nicht für MagentaTV gültig.

Wie finde ich heraus, welches MagentaTV ich nutze?

TV-Bild ruckelt, Bild und Ton danach nicht mehr synchron

vor 4 Jahren

Das TV-Bild ruckelt regelmäßig, danach sind Bild und Ton häufig nicht mehr synchron.

Tarif: MagentaZuhause XL - MagentaTV Smart

Media Receiver 401

TV: LG OLED 65 CX 9

Anbindung über WLAN, gemessene Datenrate im Mittel 140 MBit/s

2174

0

38

  • vor 4 Jahren

    Auch dir ein freundliches Hallo @uwetill ,
    mach´ mal bitte einen kompletten Stromreset. Router und Receiver vom Stromnetz trennen, gern zwanzig Minuten liegen lassen (nicht unbedingt weniger) und dann den Router wieder starten. Voraussetzung ist, das Router und MR per LAN-Kabel ohne weitere Netzwerkgeräte miteinander verbunden sind. Also alles, was nicht für diesen Aufbau benötigt wird, raus aus Netzwerk- und Stromsteckdosen! Alles!Wenn Router wieder voll einsatzbereit ist, bitte den MR wieder mit Strom versorgen und dann hinten mit dem Druckschalter drei bis viermal aus- und wieder einschalten, bis sich vorne der Text in Runterladen von Software ändert. Dies bitte ganz durchlaufen lassen, testen und berichten.
     
    Schöne Grüße

    37

    von

    vor 4 Jahren

    Hallo @uwetill,

     

    versuch es bitte dennoch einmal mit der direkten Verbindung via LAN. Nur so können wir das WLAN als Fehlerquelle ausschließen. 

     

    Viele Grüße

    Dorothea T.

    von

    vor 3 Jahren

    Hallo,

    mit der direkten LAN-Verbindung läuft die Wiedergabe ruckelfrei. WLAN geht dennoch nicht ohne Ruckeln und stehende Bilder.

    Zusätzlich startet seit einigen Tagen die Magenta Box nach dem Einschalten neu.

    Reset hat nicht gebracht.

    Nach meinem Eindruck ist die Box nicht i. O.

     

    0

    von

    vor 3 Jahren

    Hallo @uwetill,

     

    vielen Dank für die Rückmeldung.

     

    Teile uns bitte einmal mit, welche Software-Version und welche UI-Version auf der TV Box installiert ist. Wenn dies die aktuellen Versionen sind, sollte mal ein kompletter Reset der Box (vorher Festplatte entfernen) durchgeführt werden.

    Aktuelle Software-Version 2021.4.103.2.build #1

    Aktuelle UI-Version 2.105.10868

    Unter https://telekomhilft.telekom.de/t5/Fernsehen/MagentaTV-Softwareversion-und-Systeminformationen-des-Media/ta-p/3791632 ist beschrieben, an welcher Stelle die Versionen ausgelesen werden können.

     

    In der Fritz!Box 7590 bitte einmal kontrollieren, ob das WLAN für Live TV optimiert ist, wie unter https://avm.de/service/wissensdatenbank/dok/FRITZ-Box-7590/1491_Storungen-bei-der-Live-TV-Wiedergabe/ beschrieben.

     

    Gruß Ingo F.

    0

    Uneingeloggter Nutzer

    von

Uneingeloggter Nutzer

von

Das könnte Ihnen auch weiterhelfen

Gelöst

in  

511

0

2

Gelöst

in  

4988

0

4

in  

482

0

2

in  

252

0

2

Beliebte Tags letzte 7 Tage

Keine Tags gefunden!

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.