Gelöst

Das leidige Thema Fensterkontakt,Heizungsthermostat und Lüften

vor 5 Jahren

Ich habe bloß ein Problem,wenn ich meine Heizung auf 23 Grad geschaltet habe und ein Fenster auf mache,geht die Temperatur nicht auf die 5Grad runter,die ich dann eingestellt habe.Der Fensterkontakt wird vom System erkannt!

Der Haken bei Heizungseinstellungen“Lüften“ist aktiviert.
Ich habe schon einige Antworten gefunden, das es sehr lange dauert, bis der Heizungsthermostat reagiert.Es kann doch aber nicht sein, das es mehr als 25 Minuten dauert!In der App ist das öffnen sofort zu sehen.Gibt es da keine Lösung?

Danke

Gruss Sven

492

6

  • vor 5 Jahren

    Auch dir ein freundliches Hallo @Hydroproxin 

     

    sowohl die Fensterkontakte als auch die Thermostate sind einem Zimmer zuzuordnen.

    Ich habe im Wohnzimmer vier Fenster, aber nur, wenn ein bestimmtes geöffnet wird, gehen die beiden Thermostate auf 6° Frostschutz runter.

     

    schöne Grüße

    0

  • vor 5 Jahren

    Hallo, es gibt einen parallelen Thread mit einigen Erläuterungen zum Ventil.

    Auch die Zuordnung zum Raum ist wichtig. Erstmal mit den Defaults testen (6 Grad), ob alles läuft, wie erwartet.

    Wartezeiten sollten nicht größer sein, als maximal 2 Minuten.

     

    2

    Antwort

    von

    vor 5 Jahren

    Moin,

     

    wie schon erwähnt, muss der TFK und der Hzthermostat einem Raum zugeordnet sein.

    Sollte es nicht so gut funktionieren, nehm bitte mal für 10 Min. die Batterien aus dem Hzthermostaten heraus und dann wieder einsetzen. Nix drücken oder ähnliches machen. 

    Warten, bis sich der Hzthermostat mit der HB neu synchronisiert hat.

    Dann sollte es klappen....

    Viel Glück.

     

    Gruß

    Opty

    Antwort

    von

    vor 5 Jahren

    Moin,so nachdem ich jetzt alle Fensterkontakte den einzelnen Heizungsthermostaten zugeordnet habe, hat sich mein Problem gelöst😉Danke für die Hilfe👍

    Uneingeloggter Nutzer

    Antwort

    von

  • Akzeptierte Lösung

    akzeptiert von

    vor 5 Jahren

    Moin,so nachdem ich jetzt alle Fensterkontakte den einzelnen Heizungsthermostaten zugeordnet habe, hat sich mein Problem gelöst😉Danke für die Hilfe👍

    0

  • vor 5 Jahren

    Hallo @Hydroproxin,

    wie ich lese, haben die Tipps von @pamperlapescu und @Opty die beschriebene Problematik gelöst.
    Für weitere Fragen gerne wieder melden. Einen angenehmen Abend.

    Beste Grüße
    Malte M.

    0

Uneingeloggter Nutzer

Frage

von

Das könnte Ihnen auch weiterhelfen

Beliebte Tags letzte 7 Tage

Keine Tags gefunden!

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites, listed here (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.