Speedport Smart 4 Plus Starke Leistungsschwankungen über Lan / Powerline

vor 2 Jahren

Hallo zusammen,

 

seit ca. 6 Monaten haben wir die Telekom als unseren neuen Glasfaseranbieter. Aus unachtsamkeit haben wir leider den Speedport Smart 4 Plus als Mietgerät bekommen. Im Wlan gibt es leider hin und wieder schwierigkeiten mit einem Fritz Repeater, diese liegen allerdings noch im Rahmen.

 

Das größte Problem besteht jedoch seit ca. 3 Monaten über die Powerline LAN Verbindung.

 

Über die Powerline Verbindung bricht die Leistung mehrmals am Tag stark ein, d.h. von regulär ca. 50 Mbit/s auf ca. 1Mbit/s. Die Leistung bricht nicht konstant  zu bestimmten Zeitpunkten ein, sondern relativ willkürlich. Als Powerline Adapter wurde zunächst ein Technisat Powerline Webcast  1 verwendet und dann auf einen TP-Link TL-PA7017KIT AV1000 gewechselt. Bei beiden Adaptern treten die Schwankungen auf. Es wurden auch einmal alle Geräte am betreffenden Stromkreis während der PC Nutzung ausgezogen, allerdings auch ohne Verbesserung. Leider habe ich momentan keine Ideen mehr, woran es liegen könnte und wie man das Problem beheben kann (abgesehen von einem wechsel zur Fritzbox).

 

Grüße und vielen Dank schonmal.

Dennis

Letzte Aktivität

vor 2 Jahren

von

445

0

5

  • vor 2 Jahren

    Wäre es möglich auf eine Funklösung wie einem Speed Home WLAN zu wechseln?
    Powerline ist immer so ne Sache bezüglich Schwankungen...

    0

  • vor 2 Jahren

    @fcdennis Die Geschwindigkeitsprobleme über Powerline haben sicherlich nichts mit dem Smart 4 Plus zu tun, sollte die vertragliche Glasfasergeschwindigkeit per Ethernet-Kabel (LAN-Kabel) Verbindung zum S4+ immer zur Verfügung stehen.

     

    Gruß Ulrich

    0

  • vor 2 Jahren

    Treten die Probleme auch dann auf, wenn die Endgeräte direkt am Speedport angeschlossen und der PowerLAN Adapter aus dem Stromnetz entfernt wird?

    (Klingt für mich nach sporadischen Einstreuungen, wodurch entweder der Modem oder Netzwerkadapter im LAN irritiert wird.)

    0

  • vor 2 Jahren

    Ich schließe mich dem allgemeinen Credo an @fcdennis,

     

    klingt für mich, als würde es Probleme bei der Powerline gebe und als sollten über Alternativen nachdenken.

     

    Beste Grüße an alle & einen angenehmen Sonntag,

     

    Johannes P.

    0

  • vor 2 Jahren

    Hallo

    das  TL-PA7017KIT ist evtl. nicht die richtige Wahl, alternativ würde ich mal das TL-PA8030P KIT probieren, ist ein besseres Sytem.

    In der tpPLC Software mal über prüfen ob der Energiesparmodus aktiv ist, evt. dann deaktivieren, desweiteren, unter QoS , mal den Datenverkehrstyp ändern, bzw. die vorgegebenen Typen mal durchprobieren.

     

    0

    0

Uneingeloggter Nutzer

Frage

von

Beliebte Tags letzte 7 Tage

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.