Gelöst

Probleme nach der Instillation Speedport Smart 3 / Telefon funktioniert nicht mehr richtig

vor 5 Jahren

Hallo zusammen, seit gestern bin ich Telekom Kunde und mir wurde der Speedport Smart 3 angeschlossen. Das Internet läuft prima und ich kann telefonieren. Allerdings funktioniert mein DECT Telefon Panasonic KX-TG6822GS nicht mehr richtig. Bedeutet alle meine Nummern sind weg, ich kann keine neuen Nummern speichern, auch zeigt es mir nicht mehr an das ein Anruf in Abwesenheit war. Das Display ist leer bis auf das Symbol der Empfangsstärke. 

Kann es sein das mein Telefon nicht kompatibel mit der Anlage ist? Muss ich irgendetwas anders anschließen? Ich habe es mit DECT und Kabel versucht anzuschließen. Beides funktioniert nicht.

Vielleicht kann mir jemand helfen?

 

Liebe Grüße

MrRod

 

762

0

10

  • Akzeptierte Lösung

    akzeptiert von

    vor 5 Jahren

    Hast du das Telefon beim Versuch über Kabel auch wieder an der Panasonic Basis angemeldet, und nicht weiterhin an der DECT Basis des Routers?

    Das Telefon MUSS mit der eigenen Basis und Kabelverbindung zum Router verwendet werden, damit es so funktioniert wie es soll. Sonst funktioniert weder das Telefonbuch, noch Anrufe in Abwesenheit.

    2

    von

    vor 5 Jahren

    Hi danke für die schnelle Antwort

    Bild nicht vorhanden


    Wie kann ich das machen? Wenn ich über den Speedport.ip DECT raus machen geht nichts mehr...
    ("Hast du das Telefon beim Versuch über Kabel auch wieder an der Panasonic Basis angemeldet, und nicht weiterhin an der DECT Basis des Routers?")
    Sorry, bin da voll Anfänger in den Sachen

    0

    von

    vor 5 Jahren

    Im Moment habe ich das Kabel im Router. Ist aber der gleiche Effekt wie ohne Kabel...

    Bild nicht vorhanden

    0

    Uneingeloggter Nutzer

    von

  • Akzeptierte Lösung

    akzeptiert von

    vor 5 Jahren

    @MrRod71 

    Hast du das Gerät auch wieder an der eigenen Basis angemeldet? 

    Das passiert nicht von allein nur durch anstecken des Kabels. Du musst in den Einstellungen die Basis neu verbinden, nachdem du den Punkt dort angewählt hast auf der Basis den linken Knopf mit dem "Funk"-Symbol 5 Sekunden gedrückt halten. Basis PIN ist 0000. 

    edit: der Punkt sollte "anmelden" im mobilteil heißen.

    0

Beliebte Tags letzte 7 Tage

Keine Tags gefunden!

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.