IPv6-only: Kein DS-Lite / kein AFTR – warum ist echter IPv6-Betrieb nicht möglich?

vor einem Monat

Hallo zusammen,


ich habe eine Frage zur IPv6-Umsetzung bei meinem Telekom-Glasfaseranschluss (Magenta Zuhause, FRITZ!Box 4060, aktuelles OS ).

Die IPv6-Unterstützung funktioniert grundsätzlich einwandfrei. Sobald ich jedoch in der FRITZ!Box die Option

„Nur IPv6 verwenden“ aktiviere, wird keine DS-Lite-Verbindung aufgebaut – ein AFTR-Gateway wird nicht zugewiesen, obwohl die automatische Zuweisung aktiv ist.


Ebenso scheint es keine Bereitstellung von DNS64 oder NAT64 im Netzpfad zu geben.

Das führt dazu, dass IPv4-only-Geräte im Netz keinen Internetzugang mehr haben, obwohl der Anschluss im IPv6-only-Modus läuft. Ich hätte erwartet, dass bei fehlender öffentlicher IPv4 automatisch DS-Lite mit AFTR greift – das passiert aber nicht.

Meine Fragen dazu:

  1. Ist DS-Lite bei meinem Anschluss technisch überhaupt möglich oder wird bei Glasfaser grundsätzlich Dual Stack bevorzugt?

  2. Kann die öffentliche IPv4-Adresse auf Wunsch deaktiviert werden, um DS-Lite zu erzwingen?

  3. Gibt es seitens der Telekom Pläne, DNS64/NAT64 bereitzustellen, um IPv6-only-Anschlüsse ohne DS-Lite künftig praktikabel zu machen?

Ich würde mein Netz gern langfristig auf IPv6 fokussieren, stoße aber derzeit auf technische Grenzen – obwohl die Box korrekt konfiguriert ist.

Freue mich über Infos oder Rückmeldungen von Telekom-Experten oder anderen Nutzern mit ähnlicher Erfahrung.

Viele Grüße


Thomas

161

0

8

  • vor einem Monat

    Hallo @thohmann ,

    zu 1) Bei der Telekom gibt es nur Dual Stack.

    zu 2) Nein.

    zu 3) IPv6 only funktioniert doch bei der Telekom.

    3

    Antwort

    von

    vor einem Monat

    zu 1&2: verstanden. Zu 3: Das es funktioniert habe ich geschrieben. Meine Frage ging die Telekom, ob in Zukunft mehr geplant ist.

    0

    Antwort

    von

    vor einem Monat

    thohmann

    Meine Frage ging die Telekom, ob in Zukunft mehr geplant ist.

    zu 1&2: verstanden. Zu 3: Das es funktioniert habe ich geschrieben. Meine Frage ging die Telekom, ob in Zukunft mehr geplant ist.

    thohmann
    Meine Frage ging die Telekom, ob in Zukunft mehr geplant ist.

    Was willst du denn noch?

    Du hast DUAL-STACK mit echten IP-Adressen .. mehr gibts nicht! 

    0

    Antwort

    von

    vor einem Monat

    thohmann

    Meine Frage ging die Telekom, ob in Zukunft mehr geplant ist.

    zu 1&2: verstanden. Zu 3: Das es funktioniert habe ich geschrieben. Meine Frage ging die Telekom, ob in Zukunft mehr geplant ist.

    thohmann
    Meine Frage ging die Telekom, ob in Zukunft mehr geplant ist.

    DS-Lite ist doch nicht "mehr" sondern "weniger", es ist eine Krücke für Provider, die zu spät kamen und am IPv4-Adresstrog leer ausgegangen sind. Warum sollte man sich als Kunde DS-Lite wünschen?

    Uneingeloggter Nutzer

    Antwort

    von

  • vor einem Monat

    Bei der Telekom gibt es im kein DS-Lite, IPv6 läuft über die PPPoE-Verbindung so dass kein Betrieb von IPv6 ohne IPv4 möglich ist. Aber Du kannst Dir natürlich auf Deinem eigenen Router eine entsprechende Lösung bauen, niemand zwingt Dich, IPv4 ins LAN zu forwarden.

    0

  • vor einem Monat

    Hallo @thohmann,

     

    wie ich sehe, hast du hier schon hilfreiche Antworten erhalten. Sind noch Fragen offen, dann gib uns hier gerne Bescheid.

     

    Viele Grüße

     

    Katja

    0

    1

    Antwort

    von

    vor einem Monat

    Danke für die Antworten. Was nicht ist, ist halt nicht, eine Frage war es wert. Somit verwende ich dann weiter Dual-Stack.

    Uneingeloggter Nutzer

    Antwort

    von

  • vor einem Monat

    thohmann

    Sobald ich jedoch in der FRITZ!Box die Option

    „Nur IPv6 verwenden“

    Hallo zusammen,


    ich habe eine Frage zur IPv6-Umsetzung bei meinem Telekom-Glasfaseranschluss (Magenta Zuhause, FRITZ!Box 4060, aktuelles OS ).

    Die IPv6-Unterstützung funktioniert grundsätzlich einwandfrei. Sobald ich jedoch in der FRITZ!Box die Option

    „Nur IPv6 verwenden“ aktiviere, wird keine DS-Lite-Verbindung aufgebaut – ein AFTR-Gateway wird nicht zugewiesen, obwohl die automatische Zuweisung aktiv ist.


    Ebenso scheint es keine Bereitstellung von DNS64 oder NAT64 im Netzpfad zu geben.

    Das führt dazu, dass IPv4-only-Geräte im Netz keinen Internetzugang mehr haben, obwohl der Anschluss im IPv6-only-Modus läuft. Ich hätte erwartet, dass bei fehlender öffentlicher IPv4 automatisch DS-Lite mit AFTR greift – das passiert aber nicht.

    Meine Fragen dazu:

    1. Ist DS-Lite bei meinem Anschluss technisch überhaupt möglich oder wird bei Glasfaser grundsätzlich Dual Stack bevorzugt?

    2. Kann die öffentliche IPv4-Adresse auf Wunsch deaktiviert werden, um DS-Lite zu erzwingen?

    3. Gibt es seitens der Telekom Pläne, DNS64/NAT64 bereitzustellen, um IPv6-only-Anschlüsse ohne DS-Lite künftig praktikabel zu machen?

    Ich würde mein Netz gern langfristig auf IPv6 fokussieren, stoße aber derzeit auf technische Grenzen – obwohl die Box korrekt konfiguriert ist.

    Freue mich über Infos oder Rückmeldungen von Telekom-Experten oder anderen Nutzern mit ähnlicher Erfahrung.

    Viele Grüße


    Thomas

    thohmann

    Sobald ich jedoch in der FRITZ!Box die Option

    „Nur IPv6 verwenden“

    Ich hoffe, du hast vorher die Hinweise von AVM dazu gelesen. 

    0

    0

Uneingeloggter Nutzer

Frage

von

Das könnte Ihnen auch weiterhelfen

Gelöst

in  

5622

0

4

in  

577

0

7

Gelöst

in  

24017

0

4

in  

217

0

1

Beliebte Tags letzte 7 Tage

Keine Tags gefunden!

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.