Gelöst

Internet Upload langsamer als DSL Connect

vor 4 Jahren

Hallo,

 

wir haben hier das Problem, dass sich die Fritz Box 7590 DSL-seitig mit 36MBit verbindet. Die Internetverbindung anschliessend aber auf 10MBit gedrosselt wird.

 

Dies wird so in der FritzBox angezeigt (DSL 36MBit, Internet 10MBit) und auch die Praxis bestätigt dies. Ganz gleich was ich versuche, mehr als 10MBit im Upload gehen nicht.

 

 

 

Die Hotline schaut nur auf den DSL-Connect und meint, da wäre alles in Ordnung - ist es aber nicht. Wer kann mir da noch helfen?

Fritz1.jpg

Letzte Aktivität

vor 4 Jahren

von

941

13

    • vor 4 Jahren

      Welche nicht empfohlene Einstellungen sind aktiv?

      Häng mal die DSL Info inkl Fehlerzaehler und Statistik und Spektrum an. 

      In den Ereignissen welche Geschwindigkeit wird zugewiesen vom Anbieter? 

      1

      Antwort

      von

      vor 4 Jahren

      Das ist nur die Sicherheitseinstellung "Änderungen erfordern Tastendruck am Gerät" - hat damit nichts zu tun.

      7.25 ist installiert - mit der 7.21 war's vorher genauso.

       

      Fehlerstatistik ist unauffällig (Werte sind von den letzten 24 Stunden (da war letzter Neustart).

      In den Ereignissen wird die tats. Internetverbindung auch deutlich höher angegeben.

       

      Edit:

      Spektrum ist OK - wie gesagt der DSL-Connect mit der Vermittlungstelle hat ja auch einen brauchbaren Wert...

       

      Und die Störsicherheit steht auch auf "max. Perf."

      Fritz3.jpg

      Fritz4.jpg

      Fritz5.jpg

      Uneingeloggter Nutzer

      Antwort

      von

    • vor 4 Jahren

      Und ist die Box schon auf 7.25 gewechselt?

      0

    • vor 4 Jahren

      0

    • vor 4 Jahren

      DSLBenutzer

      wir haben hier das Problem, dass sich die Fritz Box 7590 DSL-seitig mit 36MBit verbindet. Die Internetverbindung anschliessend aber auf 10MBit gedrosselt wird.

      wir haben hier das Problem, dass sich die Fritz Box 7590 DSL-seitig mit 36MBit verbindet. Die Internetverbindung anschliessend aber auf 10MBit gedrosselt wird.

      DSLBenutzer

      wir haben hier das Problem, dass sich die Fritz Box 7590 DSL-seitig mit 36MBit verbindet. Die Internetverbindung anschliessend aber auf 10MBit gedrosselt wird.


      Schonmal im Online-Monitor auf "Neu verbinden" geklickt?

      6

      Antwort

      von

      vor 4 Jahren

      Sagt wer?

      Gib mal aus dem Bereich DSL Info die Unterseiten Übersicht, DSL, Spektrum und Statistik. Und bist du auf der Firmware 7.25?

      Antwort

      von

      vor 4 Jahren

      @DSLBenutzer 

      Im Bild Fritz3.jpg passt doch alles.

      DSL-Sync: 116790/36997

      Bandbreite: 109928/34632

       

      Antwort

      von

      vor 4 Jahren

      wari1957

      @DSLBenutzer Im Bild Fritz3.jpg passt doch alles. DSL-Sync: 116790/36997 Bandbreite: 109928/34632

      @DSLBenutzer 

      Im Bild Fritz3.jpg passt doch alles.

      DSL-Sync: 116790/36997

      Bandbreite: 109928/34632

      wari1957

      @DSLBenutzer 

      Im Bild Fritz3.jpg passt doch alles.

      DSL-Sync: 116790/36997

      Bandbreite: 109928/34632


      Oh, das hatte ich ganz übersehen.

       

      Laut Ereignis-Log beträgt die "Geschwindigkeit des Internetzugangs (verfügbare Bitrate)" im Upstream rund 34 Mbit/s, in der Übersicht zeigt die Box aber nur rund 10 Mbit/s an.

       

      @DSLBenutzer, da müßtest Du vielleicht mal bei AVM nachfragen, was da schiefläuft.

      Uneingeloggter Nutzer

      Antwort

      von

    • Akzeptierte Lösung

      akzeptiert von

      vor 4 Jahren

      Gelöst!

       

      So nachdem ich nun endlich dazu gekommen bin, mich mit dem Anschluss ausgiebiger zu beschäftigen, habe ich auch die Lösung gefunden:

       

      Es lag tatsächlich an der FritzBox, die von sich aus die Datenrate gedrosselt hat. Warum kann ich nicht sagen. Nach einem Werksreset und Neueinrichtung geht es jedenfalls wieder.

      1

      Antwort

      von

      vor 4 Jahren


      @DSLBenutzer  schrieb:

      Es lag tatsächlich an der FritzBox, die von sich aus die Datenrate gedrosselt hat. Warum kann ich nicht sagen.


      Ja, ich erinnere mich gerade an einen ähnlichen Fall hier im Forum. Finde den Thread aber nicht, und weiß auch nicht mehr, an welcher Einstellung es gelegen hat.

      Uneingeloggter Nutzer

      Antwort

      von

      Uneingeloggter Nutzer

      Frage

      von

      Beliebte Tags letzte 7 Tage

      Keine Tags gefunden!

      Cookies and similar technologies

      We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


      By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


      Find more information in the Privacy Policy and Partner List.


      Use of Utiq technology powered by your telecom operator


      We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites, listed here (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

      The Utiq technology is privacy centric to give you choice and control.

      It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

      The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

      • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
      • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

      By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

      You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.