Gelöst

Digitalisierungsbox Premium mit nachfolgender ISDN-Anlage an WLan da Wechsel von DSL auf Glasfaser

vor 2 Jahren

Ich benutze die Digitalisierungsbox momentan mit DSL. Nachfolgend ist eine ISDN Telefonanlage von Siemens geschaltet. Jetzt wird mein Anschluss auf Glasfaser umgestellt. Kann ich die die Digitalisierungsbox Prämium mit ISDN-Anlge weiterhin benutzen. kKann die box von DSL auf Lan bzw Wan umgestellt werden?

348

0

14

  • Akzeptierte Lösung

    akzeptiert von

    vor 2 Jahren

    Hallo @Schrehardt ,

    als erstes die bestehende Internetverbindung über DSL löschen.

    Dann mit dem Assistenten eine neue Internetverbindung anlegen.

    Internet & Netzwerkwerk -> Internet einrichten -> Neu.

    Als Verbindungstyp Externes Gateway/Kabelmodem auswählen.

     

    Deine ISDN-Anlage nutzt du einfach weiter.

     

    0

  • Akzeptierte Lösung

    akzeptiert von

    vor 2 Jahren

    Schrehardt

    danke für die schnelle Antwort. Lauft dann die nachfolgende ISDN-Anlage mit allen Diensten weiterhin?

    danke für die schnelle Antwort. Lauft dann die nachfolgende ISDN-Anlage mit allen Diensten weiterhin?

     

    Schrehardt

    danke für die schnelle Antwort. Lauft dann die nachfolgende ISDN-Anlage mit allen Diensten weiterhin?

     


    Es muss nur die Einwahl vom DSL-Modem auf den WAN-Port umkonfiguriert werden, der Rest bleibt unangetastet.

    0

    0

  • Akzeptierte Lösung

    akzeptiert von

    vor 2 Jahren

    @Schrehardt 

    Meine Antwort Externen Gateway/Kabelmodem ist natürlich falsch.

    Du brauchst externes VDSL-Modem, sonst kannst du keine PPPoE-Verbindung konfigurieren.

     

    0

    0

  • Akzeptierte Lösung

    akzeptiert von

    vor 2 Jahren

    Schrehardt

    ich stelle doch von VDSL auf Glasfaser um also werde ich ein Glasfaser-Modem anschließen.

    ich stelle doch von VDSL auf Glasfaser um also werde ich ein Glasfaser-Modem anschließen.
    Schrehardt
    ich stelle doch von VDSL auf Glasfaser um also werde ich ein Glasfaser-Modem anschließen.

    @Ich glaube ich habe inzwischen verstanden was @@wari1957 meint:

     

    Die Digitalisierungsbox kennt kein Glasfasermodem, aber sie kennt ein externes DSL-Modem. Gleichzeitig gibt es aus Sicht der Digitalisierungsbox keinen Unterschied zwischen einem DSL-Modem und einem Glasfasermodem, beide werden per Ethernet angeschlossen und leiten eine PPPoE-Session über VLAN 7 weiter.

     

    Deshalb wird es funktionieren wenn Du die Digitalisierungsbox für den Betrieb mit einem externen DSL-Modem konfigurierst, dann aber tatsächlich das Glasfasermodem anschließt.

    0

Beliebte Tags letzte 7 Tage

Keine Tags gefunden!

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.