Bandbreite kommt nicht an.

vor 10 Monaten

Hallo zusammen,

ich habe vor kurzem eine Anpassung meines Tarifes vom 250mbps auf 660mbps durchgeführt. Die Bandbreite kommt aber nicht an. Trotz das ich mein Notebook via Kabel am Router Speedport Pro Plus angeschlossen habe, zeigt der Speedtest max. 90mbps an. Ich habe zusätzlich noch eine LTE Karte im Router. Ich vermute fast, das nur noch die funktioniert. Früher hatte ich bei Steam 220mbps im Download. Reset, Trennung vom Netz >5min haben keinen Erfolg gebracht. Hat wer eine Idee? Kann mein Router die Geschwindigkeit nicht?

LG und Dank 

Patric

197

4

  • vor 10 Monaten

    Bei der Telekom gibt es keinen Tarif mit 660 Mbit/s. Verstehe ich das Richtig? Du hast deinen vorhandenen Glasfasertarif mit 250Mbit/s auf einen Glasfasertarif mit 600/300 Mbit/s upgegradet? Der Speedport Pro Plus ist mit dem Glasfasermodem korrekt verbunden?

    Du hast den Speedport Pro Plus mal für 10 Minuten vom Strom getrennt? Du hast eine vorhandene aktive SIM-Karte die im Speedport Pro Plus ist herausgenommen?

    0

  • vor 10 Monaten

    DoctorSnuggles

    max. 90mbps an

    max. 90mbps an
    DoctorSnuggles
    max. 90mbps an

    Was zeigen die Adaptereigenschaften der Netzwerkkarte im Notebook an? Ich vermute "Verbindungsgeschwindigkeit 100/100 Mbps".

    Problem wäre dann die unzulängliche Netzwerkverbindung zwischen Notebook und Router - dazu reicht, wenn das Patchkabel eine defekte Ader hat.

     

    0

  • vor 10 Monaten

    @DoctorSnuggles 

     

    Welches Farbe hat die LED am Glasfasermodem ?

    Welche Statusinformationen werden an der Weboberfläche des Speedports angezeigt?  Screenshot am besten

    Welchen Status hat die Netzwerkkarte mam Rechner - wie von @Carsten_MK2  vermutet

    Welche Geschwindigkeit bekommst du per WLAN?

     

     

     

    1

    Antwort

    von

    vor 10 Monaten

    @DoctorSnuggles

     

    Vielen Dank für deinen Beitrag in unserer Community 🙏🏽 

     

    Du hast ja bereits ein paar Rückmeldungen bekommen 🙂 Konnten diese bereits weiterhelfen? 👍🏽 Hast du mal das Glasfasermodem + Router neugestartet? Schaue sonst mal bitte auf der Konfigurationsseite des Routers, was direkt am Speedport ankommt 🤔

     

    Hinterlege bitte auch mal deine Daten im Profil 👍🏽

     

    Viele Grüße

    Timur

    Uneingeloggter Nutzer

    Antwort

    von

Uneingeloggter Nutzer

Frage

von

Das könnte Ihnen auch weiterhelfen

in  

464

0

6

Gelöst

in  

443

0

7

Gelöst

in  

224

0

2

Beliebte Tags letzte 7 Tage

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites, listed here (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.