Gelöst

Maximal Homematic IP und Homematic Geräte / Nebensächlich Maximale HomeBase2 Auslastung

vor 5 Jahren

Hallo ich habe mal eine Frage zu den Maximalen Homematic und Homematic IP geräten

 

Folgende Geräte sind im einsatz:

Homematic:Ohne IPMit IPGesamt
TührFensterKontakte7x10x17x

HeizkörperThermostat

7x-7x
ZwischenStecker2x11x13x
RauchMelder1x-1x
BewegungsMelder2x1x3x
WandThermostate-7x7x
2 Fach WandTaster-14x14x
6 Fach WandTaster-3xx3
8 Fach FernBedienung-1x1x
 = 19x= 47x= 66x

 

Das heißt ich habe gerade 19 Geräte Ohne IP, 47 Geräte mit IP und somit 66 HomeMatic Geräte im Einsatz.

Ich habe gelesen das 80-100 Geräte bei MagentaSmartHome eingebunden werden können.

Ich betreibe das ganze an der HomeBase2.

Heißt das jetzt das ich noch ca. 14-24 Getäte einbinden kann, oder ist hier Hemematic mit und ohne IP seperat zu sehen?

Also jeweils 80-100 Geräte oder beide zusammen?

 

Falls ich meine Grenze in Kürze erreiche, gibt es die Möglichkeit eine CCU oder sowas von Homematic IP bei MagentaSmartHome als externe Basisstation anzulernen?

Bei HomeMatic IP solls ja mittlerweile gehen das man mit zusätzlichen BasisStationen erweitern kann (Alkuell +1 Demnächst +3).

 

Die Aufgelisteten Geräte sind bei weitem auch nicht alles was an MagentaSmartHome bei mir eingebunden ist.

___

Ab Jetzt nicht mehr die eigentliche Frage, wollte aber unbedingt mal selbst alles zusammenrechnen wo ich da so ankomme ^^

Eventuell kommen dadurch ja sogar noch neue eventuelle Hindernisse auf mich zu.


Hinzu kommen noch:

  • 6 IP Kameras von DLink (Lan)
  • 12 BewegungsMelder von der Telekom (dect)
  • 2 ZwischenStecker von der Telekom (dect)
  • 1 BitronVideo Zwischenstecker (Intern ZigBee)
  • 51 PhillipsHue Birnen über PhillipsHue Bridge 2 (Extern ZigBee) (Lan)
  • 1 Logitech Harmony HUB (Service)
  • 1 Nuki Türschloss (Service)
  • 1 SONOS PlayBar (4 Play One Folgen in kürze) (Service) (Lan)

Macht nochmal 75 Geräte an der HomeBase2 was dan insgesammt 141 Geräte macht.

Geplant sind noch:

4 Sonos Boxen plus SUB wobei der glaube nicht angelernt wird (Service) (Lan)

4-10 Schalter Von Homematic

1 WandTermostat von Homematic

3 BewegungsMelder von Homematic

7 PresänzMelder von Homematic

1 Außen LichtMesser Homematic

1 Außen TemperaturMesser Homematic

Und noch rund 10 Funksteckdosen was bedeutet die Funkdosen könnten von Homematic die Grenze sprengen. (99HM Geräte)

20 PhillipsHue Birnen über eine 2. PhillipsHue Bridge (Klappt, schon durch anderen Beitrag erfahren) (Extern ZigBee) (Lan)

1 Centra PIN Pad (Intern ZigBee)

Dann bin ich bei 199 Geräte an meiner MagentaSmartHomeBase ^^

Und dann wird mir sicher noch neues einfallen was es dann mal neues gibt.

Wenn ich das hier so richtig sehe geht bei mir bald nur noch (dect) und (Intern ZigBee) wenn ich ab hier noch weiter was aufrüsten will oder?

 

Freue mich auf eure Rückmeldungen.

874

156

  • Akzeptierte Lösung

    akzeptiert von

    vor 5 Jahren

    Ach ja, noch ein Hinweis.

    Bei MSH wird immer die Sicherheit eingeschaltet, das erzeugt doppelte Funklast.

    Schalt es am Besten immer gleich aus.

    0

Das könnte Ihnen auch weiterhelfen

Gelöst

in  

465

0

1

Gelöst

in  

693

2

4

Gelöst

in  

408

0

3

Beliebte Tags letzte 7 Tage

Keine Tags gefunden!

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites, listed here (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.