Bitron Zwischenstecker 902010/25 falsche Verbrausanzeige

vor 5 Jahren

Hallo, ist folgendes Verhalten normal?

 

ich kam heute auf die Idee, mit einem Bitron Zwischenstecker 902010/25 mit Verbrauchsmessung die Leistungsaufnahme an meiner Steckdosenleiste zu messen. Und dann der Schock fast 5kw dran. Aber das kann nicht sein ein TV, ein Fire TV und der MR401. 
Also neuen Stecker eingerichtet, aber es bleibt dabei (5kw). Weiter, alle Geräte raus und dann die Überraschung, es werden immer noch 3,5kw angezeigt. Erst wenn ich eine Leiste/Verteiler ohne LED (On/Off) Anzeige einstecke bleibt die Anzeige bei Null (ohne Geräte eingesteckt).

196

0

4

  • vor 5 Jahren

    Dass jetzt aber die Steckdosenleiste einfach nen Defekt hast ist nicht möglich oder wie kommst du darauf dass es zwingend die Verbrauchsanzeige sein soll die falsch ist?

    0

    2

    Antwort

    von

    vor 5 Jahren

    Weil ich verschiedene Leisten (on/off optisch signalisiert) ausprobiert habe. Auch habe ich mehrere Bitron Zwischenstecker probiert. Und bei null Verbrauchern eingesteckt wird ein Verbrauch von 3kw angezeigt (bei einer 5er Leiste) bei einer 4er Leiste sind es nur 2,5kw die im Leerlauf angezeigt werden. Bei einer Leiste ohne optische Signalisierung Stimmt die Verbrauchsanzeige. 

    0

    Antwort

    von

    vor 5 Jahren

    HerrTH

    Weil ich verschiedene Leisten (on/off optisch signalisiert) ausprobiert habe. Auch habe ich mehrere Bitron Zwischenstecker probiert.

    Weil ich verschiedene Leisten (on/off optisch signalisiert) ausprobiert habe. Auch habe ich mehrere Bitron Zwischenstecker probiert.

    HerrTH

    Weil ich verschiedene Leisten (on/off optisch signalisiert) ausprobiert habe. Auch habe ich mehrere Bitron Zwischenstecker probiert.


    Das hättest du natürlich auch schon im ersten Beitrag schreiben können dass es sich um mehr als nur 2 Steckdosenleisten und einen einzigen Bitron-Stecker handelt welche du getestet hast

    Bild nicht vorhanden

    0

    Uneingeloggter Nutzer

    Antwort

    von

  • vor 5 Jahren

    Hallo @HerrTH,

    da ich auch zwei von den Zwischensteckern hier Zuhause habe, habe ich das gerade mal mit einer großen Steckdosenleiste getestet. Da ging die Verbrauchsmessung tatsächlich auf 2kW. Also Gegenprobe mit einem Magenta Smarthome Zwischenstecker, da bleibt die Verbrauchsanzeige bei 0. Sehr merkwürdig.

    Grüße
    Peter

    0

    0

Uneingeloggter Nutzer

Frage

von

Das könnte Ihnen auch weiterhelfen

Beliebte Tags letzte 7 Tage

Keine Tags gefunden!

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.