Speedphone 11 kein Freizeichen

vor 6 Jahren

Hallo miteinander,

 

seit Speedphone11 höre ich erst ein Freizeichen nach einem Router Neustart... sehr ärgerlich. Was könnte man da machen?

Letzte Aktivität

vor 6 Jahren

von

1115

0

10

  • vor 6 Jahren

    Hallo @holtbehr,

     

    nimm mal die Akkus aus dem Speedphone für ca. 10 Minuten, wieder einlegen

    und dann erneut testen.

     

    An welcher DECT Station ist das Speedphone angemeldet?

     

    VG Gurke

    1

    Antwort

    von

    vor 6 Jahren

    @Gurkedanke für die Antwort. Verständnisfrage: Aktuell kann ich angerufen werden und höre manchmal auch ein Freizeichen wenn ich anrufen will. Wenn es nicht geht muss ich den Router neu starten. Führt das Akkus rausnehmen dann ggfs. zur dauerhaften Lösung des Problems (da ich das Problem aktuell "von Hand" lösen kann aber halt umständlich).

     

    Achja, wir haben einen Speedport Pro.

    0

    Uneingeloggter Nutzer

    Antwort

    von

  • vor 6 Jahren

    Servus holtbehrendt,

    lieber ein Freizeichen als gar keins

    Bild nicht vorhanden



    Aber Spaß beiseite, das ist ganz klar ärgerlich, hierbei könnte ich mir vorstellen das die DECT -Basis oder dein Speedphone spinnt.

    Hierbei einmal folgende Steps zur Fehlerbehebung:

    - Router neustarten ( DECT Basis mal aus und wieder an)
    - Speedphone reset auf Werkseinstellungen
    - Neu koppeln
    - vll. andere Basis auswählen
    - mög. neuste Firmware aufs Speedphone laden (passiert automatisch via. DECT Basis)

    Sollte alles nichts helfen, müsste man es hier mit einem anderen Speedphone 11 ausprobieren ob es da genauso spinnt.

    Bleibt das Freizeichen permanent erhalten? Sowohl in der Ladeschale sowie außerhalb?

    0

    6

    Antwort

    von

    vor 6 Jahren

    @holtbehr,

    haben Sie schon einmal ein Reset des Routers durchgeführt und diesen neu eingerichtet?


    Grüße Detlev K.

    0

    Antwort

    von

    vor 6 Jahren

    Hallo Detlev, danke für Ihre Antwort.

     

    aktuell führe ich einen Router reset durch wenn ich ein Freizeichen hören möchte... eine komplette neu Einrichtung habe ich noch nicht versucht, kann es aber auf die Agenda setzen 

     

    Gruß 

    Stefan 

    0

    Antwort

    von

    vor 6 Jahren

    Hallo @holtbehr,

    das wäre Klasse. Ich bin gespannt und freu mich auf Ihre Antwort.

    Viele Grüße
    Daniela B.

    0

    Uneingeloggter Nutzer

    Antwort

    von

  • vor 6 Jahren

    Hallo @holtbehr,

    Sie haben hier schon hilfreiche Tipps erhalten. Haben Sie diese schon getestet? Klappt es wieder mit dem Freizeichen?

    Viele Grüße
    Melanie S.

    0

Uneingeloggter Nutzer

Frage

von

Beliebte Tags letzte 7 Tage

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.