Glasfaserrouter und LAN Brücke mit MESH repeater

vor 5 Monaten

Hallo zusammen ,

Mein Glasfaserrouter (glasfaserfähig)kommt evtl. in den Keller ohne Glasfasermoden da nicht gebraucht wird in dem Falle.

Vom Keller in das EG ist ein Cat 6 Lan Kabel. Kann ich das Kabel dann vom Router im EG als LAN Brücke verbinden mit einem Speed Home Mesh? Ich sollte doch dann kein Geschwindigkeitsverlust haben da der Mesh im EG per LAN am Router angeschlossen ist? Kann ich dann zb mit dem WLAN des Mesh im EG einen weiteren Mesh im OG per WLAN verbinden?

Lg

Letzte Aktivität

vor 5 Monaten

von

109

0

4

  • vor 5 Monaten

    Kommt auf deine verwendete Hardware an (du schreibst leider nicht was du verwendest), bei AVM ist das kein Problem.

    0

    2

    Antwort

    von

    vor 5 Monaten

    Speedport 4plus im Keller und im EG dann als LAN Brücke die Speed Home Scheibe der Telekom ..die würde ich gerne per LAN verbinden. (Ca. 9 Meter)

    0

    Antwort

    von

    vor 5 Monaten

    @user_1a1e08 der erste Teil deines Plans geht ohne Weiteres.

     

    Bei der Verbindung EG zu OG kommt es auf deine Bauweise und die Gegebenheiten vor Ort an. Im Zweifelsfall ist vielleicht ein dritter Mesh-Knoten erforderlich.

     

    Sören

    0

    Uneingeloggter Nutzer

    Antwort

    von

  • vor 5 Monaten

    user_1a1e08

    Kann ich das Kabel dann vom Router im EG als LAN Brücke verbinden mit einem Speed Home Mesh? Ich sollte doch dann kein Geschwindigkeitsverlust haben da der Mesh im EG per LAN am Router angeschlossen ist? Kann ich dann zb mit dem WLAN des Mesh im EG einen weiteren Mesh im OG per WLAN verbinden?

    Hallo zusammen ,

    Mein Glasfaserrouter (glasfaserfähig)kommt evtl. in den Keller ohne Glasfasermoden da nicht gebraucht wird in dem Falle.

    Vom Keller in das EG ist ein Cat 6 Lan Kabel. Kann ich das Kabel dann vom Router im EG als LAN Brücke verbinden mit einem Speed Home Mesh? Ich sollte doch dann kein Geschwindigkeitsverlust haben da der Mesh im EG per LAN am Router angeschlossen ist? Kann ich dann zb mit dem WLAN des Mesh im EG einen weiteren Mesh im OG per WLAN verbinden?

    Lg

    user_1a1e08
    Kann ich das Kabel dann vom Router im EG als LAN Brücke verbinden mit einem Speed Home Mesh? Ich sollte doch dann kein Geschwindigkeitsverlust haben da der Mesh im EG per LAN am Router angeschlossen ist? Kann ich dann zb mit dem WLAN des Mesh im EG einen weiteren Mesh im OG per WLAN verbinden?

    Hallo @user_1a1e08 

     

    dreimal ja!

     

    und hier findest du eine Beschreibung für dein Vorhaben.

    https://telekomhilft.telekom.de/conversations/telekom-hilft-news/mesh-ah-ah-savior-of-the-wlan/668880eb4ae73561da1cfc5b?commentId=6688a09d4ae73561da9e28b0#M26456

     

    etwas nach unten scrollen zu. 

    Speed Home WLAN bzw. Speed Home WiFi als Mesh-Basis einrichten

    0

Uneingeloggter Nutzer

Frage

von

Das könnte Ihnen auch weiterhelfen

Beliebte Tags letzte 7 Tage

Cookies and similar technologies

We use cookies and similar technologies (including ) on our website to save, read out and process information on your device. In doing so, we enhance your experience, analyze site traffic, and show you content and ads that interest you. User profiles are created across websites and devices for this purpose. Our partners use these technologies as well.


By selecting “Only Required”, you only accept cookies that make our website function properly. “Accept All” means that you allow access to information on your device and the use of all cookies for analytics and marketing purposes by Telekom Deutschland GmbH and our partners. Your data might then be transferred to countries outside the European Union where we cannot ensure the same level of data protection as in the EU (see Art. 49 (1) a GDPR). Under “Settings”, you can specify everything in detail and change your consent at any time.


Find more information in the Privacy Policy and Partner List.


Use of Utiq technology powered by your telecom operator


We, Telekom Deutschland GmbH, use the Utiq technology for digital marketing or analytics (as described on this consent notice) based on your browsing activity across our websites (only if you are using a supported internet connection provided by a participating telecom operator and consent on each website).

The Utiq technology is privacy centric to give you choice and control.

It uses an identifier created by your telecom operator based on your IP address and a telecom reference such as your telecom account (e.g., mobile number).

The identifier is assigned to the internet connection, so anyone connecting their device and consenting to the Utiq technology will receive the same identifier. Typically:

  • on a broadband connection (e.g., Wi-Fi), the marketing or analytics will be performed based on the browsing activities of consenting household members’.
  • on mobile data, the marketing will be more personalised, as it will be based on the browsing of the individual mobile user only.

By consenting, you confirm that you have permission from the telecom account holder to enable the Utiq technology on this internet connection.

You can withdraw this consent anytime via "Manage Utiq" at the bottom of this site or in Utiq’s privacy portal (“consenthub”). For more, see Utiq's privacy statement.